Pengolahan Limbah Serat Fiber sebagai Substitusi Material Pengisi Media Tanam Organik di Mitra WBS Fiberglass Poncokusumo

Muhammad Roy Asrori; Aman Santoso; Sumari Sumari; Yana Fajar Prakasa; Siti Nur Mahmudah

doi:10.36782/ijsr.v5i01.177

Muhammad Roy Asrori Universitas Negeri Malang
Aman Santoso Universitas Negeri Malang
Sumari Sumari Universitas Negeri Malang
Yana Fajar Prakasa Universitas Negeri Malang
Siti Nur Mahmudah Universitas Negeri Malang

DOI: https://doi.org/10.36782/ijsr.v5i01.177

Keywords: Fiberglass, Material Waste, Organic Growing Media, Service

Abstract

Micro-enterprises in the community still need a helping hand in the form of a service program from the campus. It is known that the micro-enterprise community belongs to the lower middle class, so there is still a lack of interest in seeking information/literacy and this results in the absence of business development in the future in a better direction. In Karanganyar Village, Poncokusumo, Malang, a fiber business was found in the manufacture of tools made of plastic, this business has been running for 3 years and there is still no high enough development. In addition, another problem is the problem of fiber waste that has not been utilized at all. There was no processing or conversion into useful and economically valuable materials. The solution offered is the manufacture of organic pots/growing media. The method of implementing this service used three stages, namely preparation, implementation, and reporting. The data collected in the form of documentation, observation, and the results of filling out the respondent's questionnaire which was then analyzed descriptively qualitatively. The results of the service showed that organic growing media from fiberglass can be applied and attract partners' interest. Knowledge of occupational health and safety has enthusiastically educated partners. The results of the partner satisfaction questionnaire showed that this service activity has a very satisfied response category of 65.7% and a satisfied response of 34.3%. So, WBS fiberglass partners have received, supported, appreciated, and followed this service well.

Downloads

Download data is not yet available.

Author Biographies

Muhammad Roy Asrori, Universitas Negeri Malang

Program Studi Kimia

Aman Santoso, Universitas Negeri Malang

Program Studi Kimia

Sumari Sumari, Universitas Negeri Malang

Program Studi Kimia

Yana Fajar Prakasa, Universitas Negeri Malang

Program Studi Kimia

Siti Nur Mahmudah, Universitas Negeri Malang

Program Studi Kimia

References

Ali, S. S., & Syamsuar, S. (2016). Pembuatan Body Plastik Spare Part Automotif Berbahan Komposit Fiberglass. Jurnal Mekanova: Mekanikal, Inovasi Dan Teknologi, 2(3), 108–115.

Arifin, F., Qisti, A., Asrori, M., Hakimah, N., & Muchson, M. (2020). Analisis Kebutuhan Pembinaan Karya Tulis Ilmiah Terintegrasi Kearifan Lokal Berbasis Online di Era Masa Pandemi Covid-19. Prosiding Seminar Nasional IKIP Budi Utomo, 1(1), 688–698.

Dirwan, A. (2021). Kendali Ekonomi Outlook Indonesia Tahun 2021 Pasca Pandemi Global ditinjau dari Mikro dan Makro Ekonomi. Jurnal Ilmiah Manajemen Surya Pasca Scientia, 10(1), 1–4.

Fahrika, A. I., & Roy, J. (2020). Dampak Pandemi Covid 19 terhadap Perkembangan Makro Ekonomi di Indonesia dan Respon Kebijakan yang Ditempuh. Inovasi, 16(2), 206–213.

Izza, S. N., Hidayat, R., & Nugrahani, P. (2022). Kajian Sumber Bibit dan Komposisi Media Tanam Terhadap Pertumbuhan Dan Hasil Tanaman Porang (Amorphophallus onchophyllus Prain). Jurnal Agrium, 19(2), 174-182.

Jaya, J. D., Ilmannafian, A. G., & Maimunah. (2019). Pemanfaatan Limbah Serabut (Fiber) Kelapa Sawit dalam Pembuatan Pot Organik. Jurnal Sains Dan Teknologi Lingkungan, 11(1), 1–10.

Latief, P. V., Iskandar, B. H., & Purwangka, F. (2018). Identifikasi Keselamatan Kerja pada Proses Pembuatan Perahu Fiberglass. ALBACORE Jurnal Penelitian Perikanan Laut, 2(1), 123–133.

Modjo, M. I. (2020). Memetakan Jalan Penguatan Ekonomi Pasca Pandemi. Jurnal Perencanaan Pembangunan, 4(2), 103–106.

Muchson, M., Setiawan, N. C. E., Sari, M. E. F., Novitasari, S., & Rokhim, D. A. (2021). Program Pembinaan Pengembangan Media Pembelajaran Bagi Guru Kimia MA/SMA pada MGMP Kimia Kabupaten Mojokerto Berbasis IoT. Panrita Abdi-Jurnal Pengabdian Pada Masyarakat, 5(3), 420–431.

Rokhim, D. A., Kurniawan, C. S. A., Aisyah, S. D. N., Ramadhanti, I., Praba, R. S., & Siddiq, I. H. Al. (2021). Upaya Peningkatan Sumber Daya Manusia Perangkat Desa Mojoruntut melalui Pelatihan Tata Kelola Administrasi dengan Perangkat Lunak Microsoft Ooffice. Jurnal Graha Pengabdian, 3(1), 75–83.

Romadhoni, R., & Nurhasanah, N. (2020). Analisa Expected Monetary Value Produksi Kapal Ikan Fiberglass Menggunakan Metode Decision Tree. COSTING : Journal of Economic, Business and Accounting, 4(1), 63–69.

Siregar, A. H., Setyawan, B. A., & Marasabessy, A. (2016). Komposit Fiber Reinforced Plastic sebagai Material Bodi Kapal Berbasis Fiberglass Tahan Api. Bina Teknika, 12(2), 261–266.

Srimudin, A., & Syukerti, N. (2021). Model-Model Komunikasi Bisnis yang Efektif di Era New Normal. Jurnal Ilmu Komunikasi Balayudha, 1(1), 1–14.

Yamali, F. R., & Putri, R. N. (2020). Dampak Covid-19 Terhadap Ekonomi Indonesia. Ekonomis: Journal of Economics and Business, 4(2), 384–388.

Yani, F., & Warid, W. (2022). Respon Tanaman Lidah Mertua Terhadap Beberapa Jenis Media Tanam Dalam Performa Kokedama. Jurnal Bioindustri, 5(1), 25–34.